3D paper craft Bull. PDF template for self-assembly of a Bull. Also SVG and DXF files for plotter cutting. A great interior item or a great gift.
Anyone can assemble such a sculpture by carefully studying the instructions.
IMPORTANT:
Please note that this is a DIGITAL PRODUCT, and you will need to download and print it yourself. You will not receive physical products.
The size of the finished figure:
height 550 x width 1027 x depth 290 mm when printing templates on 30 sheets A4 format.
You can enlarge the sculpture by printing the templates on A3 paper. The dimensions will be as follows: height 785 mm x length 1466 mm x depth 414 mm.
The 3D model can be seen and rotated here:
https://skfb.ly/puuq7
You will receive:
1. Templates, assembly instructions in PDF format,
2. SVG files – 15 pieces for cutting templates on plotters such as Cricut. (templates are designed for A3 cardboard sheets, each sheet has its own SVG file)
3. DXF files – 15 pieces for cutting templates on other types of plotters. (templates are designed for A3 cardboard sheets, each sheet has its own DXF file)
3. The file “Bull-Pepakura” in PDO format with the “Pepakura-View” function is intended ONLY FOR VIEWING!!!
4. Installation file of the PepakuraViewerPortable application for viewing “Bull-Pepakura”, which is installed in two clicks.
With the PepakuraViewerPortable application, it will be much easier and faster for you to create your paper sculpture.
You will need:
1. Thick paper or designer cardboard of A4 or A3 format
2. Printer (or local printer).
3. Paper cutter or home plotter such as Cricut.
4. Paper cutting mat.
5. Thin awl.
6. Glue.
Detailed instructions in PDF format.
Here’s a quick rundown of what you need to do:
1. Download and print the PDF template on 250-300gsm paper or card.
2. Cut along the outline.
3. Mark the fold lines (with a fine awl).
4. Fold the lines.
5. Find the same numbers and glue them together.
6. Follow the instructions carefully to create your own unique sculpture!
